Moca Travertine Vitrified Porcelain

Suggestion

Our porcelain paving has a very low porosity, which means no stains, no water damage, and no need for sealing.

Slip Resistant – Stain Resistant – Frost Proof – Fade Resistant – No Maintenance Required!

Suggestions laying with adhesive on a Screed
1 Apply the adhesive spreading two layers, one on each surface (on the tile and on the foundation).
2 Arrange gaps of 3-5 mm between the tiles using the cross spacers provided for this purposes.
3 Upon completion, clean the surface thoroughly removing all residues of plaster and adhesive.

Suggestions laying dry on Grass
1 Once the positions of the tiles have been decided upon, remove the grassy surface for a depth of about 5 mm.
2 Place a layer of fine gravel or sand in the empty space to level it & stabilise the tile.
3 Position the tile, checking that it is flat and correcting this if necessary

Suggestions laying dry on Gravel and Sand
1 Flatten the surface of the foundation with the help of a leveling bar.
2 Choose the pattern, arranging the tiles on the ground.
3 Position the tiles exactly, using a bar to space them out (or cross spacers if positioned close together) to improve the alignment.

Primer Application
As per Industry Standards – Primer must be applied to the back of the slab.
For commercial use, 2mm application 8m2 coverage.
For domestic use, 1mm application 16m2 coverage.

You can also check our related products like PETRA SLATE ANTHRACITE VITRIFIED PORCELAIN.

Specifications