Joint-It Porcelain Epoxy Grout 400ml Inc. Nozzle

From £23.49

Full Packs Split Packs
Product NameThickness (mm)Nos of Slabs per packPack Size/ Qnty m2Price per m2Price
(inc VAT)
Qty
(No. of Packs)
Amount
Tan Color 1 1 £23.99 23.99
Raven Color 1 1 £23.99 23.99
Grey Color 1 1 £23.99 23.99
 Sub-total£0.00

Full Pack Order : *FREE DELIVERY to Most postcodes in Mainland UK, A delivery surcharge may be applicable for certain postcodes

Product NameThickness (mm)Area per slab (m2)Price per m2Price (Inc VAT)Qty (Slabs)Total area (m2)Amount
 Sub-total--£0.00

Split Pack Order: Will incur an £78 handling fee at checkout.

It would be cheaper to buy a full pack

Joint-It Porcelain Epoxy Grout 400ml Inc. Nozzle

Joint-It Porcelain Epoxy Grout 400 ml only £ 13.49 per tube inc vat
Joint-It Porcelain Epoxy Grout is unlike any other jointing product on the market for outdoor porcelain patios.

Gone are the days of racing against the clock to wash cement-based grouting products off your porcelain paving before it stains. Joint-It Porcelain Epoxy Grout just peels right off with a blade for clean and simple jointing! The strength and durability of this product are like none other and the extremely low maintenance is part of the reason porcelain paving has become so popular. Until now, there was no grouting product on the market that was completely rock solid/non-permeable and would not absorb any dirt and grime.

Joint-It Porcelain Epoxy Grout 400ml

Joint-It Porcelain Epoxy Grout is an innovative 2-part epoxy grout specifically designed for outdoor porcelain paving with small joints. With exceptional bonding characteristics, this product is a super strength, non-staining, non-permeable solution to grouting porcelain. Please note that, on rare occasions, the epoxy can react with certain paving materials, the wax used on installation, etc , and take a little longer to cure to the grey color as advertised; this can take up to 30 days, but that is very unusual.

DO NOT USE in temperatures below 5 degrees Celsius or above 25 degrees Celsius or in wet conditions. This Product should not be used below 5’c or above 25’c. In cooler temperatures, between 5 -10’c, we strongly recommend submerging the tubes in hot water for 30 minutes before application.

Application Process:

1: Apply a generous film of Joint-It Anti-Bonding Wax to the top of the paving slabs along both sides of the joint.
2: Using the application gun, slowly squeeze the product into the joints covering above the level of the tiles.
3: Pull the round finishing tool along the joints to create a smooth finish.
4: When the joints feel hard to touch, use a blade to peel off excess product.